How To Install Linoleum Flooring

Install Linoleum Flooring

While hardwood plywood is on the rise, so is linoleum flooring. Wood paneling itself is on the decline because families are seeing how affordable linoleum really is.

You’re set on linoleum but aren’t sure how to install it. Read this guide on how to install linoleum flooring today!

Remove the Baseboards

Once you choose your laminate flooring, you’ll need to remove the baseboards. You’ll want to be sure that you have a flat and smooth surface.

Any bumps could cause cracking. Pry off the baseboards with a hammer.

While linoleum flooring rolls could go over another flooring, you’ll want to remove damaged material. To ensure that the area is flat, use a belt sander.

Measure the Dimensions

Measure the dimensions of the section before you begin. Cut the linoleum according to the look that you desire.

Check the moisture of the subfloor. If you’re going to glue linoleum, you’ll need the moisture content to be 13% or lower. Wait for it to dry before you begin if it’s higher.

Lay Tiles

Lay tiles on the floor. You never want to glue them together before placing them on the floor. Have a 1/4 inch gap around the floor.

Use a notched trowel to spread the adhesive onto the subfloor. Press the tiles onto the adhesive.

Start off with small sections. To trim the edges, use a linoleum knife. You’ll want to have v-shaped cuts.

Use Rollers

Use rollers and begin in the middle. Start from the middle and go toward the edge. Solvents will remove excess linoleum.

Let It Dry

Once it’s done, you’ll want to let it dry. They could take around 1 day to fully dry.

Check the directions on the label. Some could take longer than this. It’ll help you avoid bumps from appearing.

Install Baseboards

You can either install baseboards or use your old ones. Have them touch the new flooring.

Don’t place pressure on them. You could use caulk at the top of the baseboards. Don’t use it at the bottom.

Use Linoleum Sheets

If you’re using sheets instead of flooring tiles, you’ll want to use accurate cuts. Consider using a template to speed up the process.

You’ll need to unroll the linoleum in a large space. Tape the pieces over top of an old newspaper.

Cut the sheet to the room’s dimensions. Use a utility knife.

Let it lie flat for a while before you begin. If the room is wider than the roll, you can use one side of the room for a seam.

You’ll then lay the linoleum in place to see how it fits and then glue it. Use a roller over the top of the floor.

Exploring How to Install Linoleum Flooring

After exploring this guide, you should have a better idea of how to install linoleum flooring. Take your time deciding what the best option is for you.

Would you like to read more informative content? Be sure to check out our other articles today!


Leave a reply