How to Prevent a Flag From Wrapping Around the Pole
Do you have a flag that keeps wrapping around the pole? Are you not sure how to fix it? A flag that keeps wrapping around the pole can be quite annoying.
You want your flag to fly openly in the wind so everyone can see it. If it’s wrapped around the pole, it looks tacky. So, what do you do about a flag wrapping around the pole?
Check out this guide to learn how to prevent a flag from wrapping around the pole.
Table of Contents
Purchase a Spinning Flagpole System
Purchasing a spinning flagpole system is one of the best ways to prevent a flag from wrapping around the pole. These flagpoles come with ballbearing joints that allow the entire flagpole or the top portion of the flagpole to spin so that the flag never gets tangled.
Once you’ve purchased a spinning flagpole system, choose a location to mount your flagpole. Then, attach the bracket using a screwdriver or an electric drill. Slide the flag onto the flagpole and attach the flag to a flag tie located at the end of the pole.
Next, mount the pin onto the bracket. Lastly, mount the flagpole onto the pin.
Purchase a Rotating Collar System
You can also purchase a rotating collar system to prevent the flag from wrapping around the pole. With a rotating collar system, the collars are located above and below the stationary bands.
When the wind hits the flag, the whole flag rotates around the pole while the pole itself remains stationary. To install a rotating collar system, remove any ornaments from the top of the flagpole.
Then, slide on the bottom collar over the top of the flagpole, ensuring that the split ring end goes first. If you use a premounted kit, all you need to do is attach your flag to the split rings and then install the pole.
After you slide the two stationary bands onto the flag pole, slide on the top collar next. This time, the split ring end should slide on last. Then, you can put your ornaments back on the flag pole.
Next, push the band and top collar to the top of the flagpole so they’re about 1/4-inch from the top of the pole or from the ornament. Then, move the band so it’s about 1 to 1.5 inches from the bottom of the collar. After doing this, tighten the band screw so it’s secured in place around the pole.
If installed correctly, the top collar should rotate around the pole and float above the stationary band. After checking the top collar, loop the split ring through the top eyelet (also known as the grommet).
On some flagpole models, you may need to attach the split ring to a stationary split ring or attach it to the collar before you loop the ring through the flag eyelet.
The last step is to push the bottom collar up through the flagpole and then attach the collar’s split ring to the bottom eyelet of the flag. Situate the collar so your flag has about 1 to 1.5 inches of slack. Lastly, tighten the band screw and your flag will be good to go! You can check out https://flagpolefarm.com/category/titan-products/ to purchase a rotating collar system.
Purchase an Anti-Furling Kit
You can also use an anti-furling kit to prevent your flag from wrapping around the pole. An anti-furling kit is similar to a rotating pole.
With this kit, the section of the pole where you mount the flag spins in the direction of the wind. Before buying an anti-furling kit, keep in mind that each kit is designed for a specific flagpole size. Be sure to check the height and diameter of your flagpole before buying your kit.
Purchase a Heavier Flag
If you don’t want to purchase a new flagpole system or kit, you can also just purchase a heavier flag. The weight of the flag will mainly depend on the materials that it’s made from. Here’s a quick overview of common flag materials:
flag material and is the least likely to wrap around a pole. It’s strong, durable, and heavyweight. However, due to its heavier weight, it’ll only fly if there are strong winds.
Cotton is one of the most popular flag materials. While it gives flags a classic, elegant look, it’s not for outdoor use, as it doesn’t hold up well against the elements.
Cotton retains moisture, so when it rains, your cotton flag will become soaked. Add in strong winds, and you end up with a flag with a very short lifespan.
The great thing about nylon flags is that they’re water-resistant. However, nylon is also a very lightweight material, which means it easily wraps around a flagpole.
Even the slightest breeze can cause a nylon flag to wrap around the pole.
Purchase a Non-Tangle Rod
Last but not least, you can purchase a non-tangle rod to prevent your flag from wrapping around the pole. Non-tangle rods are typically between two and four feet in length.
All you need to do is clip one end of the rod to the flagpole’s grommet and then attach the other clip to the flag itself. When the wind blows, the rod will prevent the flag from wrapping around the pole.
Flag Wrapping Around the Pole: Time to Act
If your flag is wrapping around the pole, you now know how to make it stop. Pretty soon, your flag will be flying high and tangle-free.
Be sure to check back in with our blog for more tips and tricks on flying flags.